-40%
2.4v 800mAh Phone Battery for Uniden BT1011 BT1018 V-Tech BT184342, BT284342 1Pc
$ 3.35
- Description
- Size Guide
Description
Brand:PKCELL
Material:
Ni-MH
Capacity:
800mAh
Voltage:
2.4V
Compatible with
(Press "ctrl+F" - Type your phone type -Press "Enter" to find whether it is compatible with your phone type)
:
Uniden: BBTG0671011, BBTG0743001, BT-101, BT-1011, BT-1018, DCX300, DCX400, DECT-3080, DECT-3080-2, DECT-4086, DECT-4096, DECT 6.0, BT101, BT1011, BT1018, DECT3080, DECT3080-2, DECT30802, DECT4086, DECT4096
For Sanik: 2SN-AAA55H-S-J1, 2SN-AAA60H-S-J1, 2SN-AAA65H-S-J1, 2SN-AAA70H-S-J1, 2SN-AAA70H-SX2F, 2SNAAA55HSJ1, 2SNAAA60HSJ1, 2SNAAA65HSJ1, 2SNAAA70HSJ1, 2SNAAA70HSX2F
Sony: 6030, 6031, 6032, 6041, 6042, 6043, 6051, 6052, 6053, 8300
V-Tech: 6010, 6030, 6031, 6032, 6041, 6042, 6043, 6044, 6051, 6052, 6053, 6110, 6111, 6113, 6121, 6122, 6201, 6204, 6205, 6209, 6211, 6215, 6219, 6221, 6222, 6225, 6226, 6228, 6229, 6245, 6301, 6321, 6322, 8300, 8301, 831, 80-1330-01-00, 80-1326-00-00, 89-1326-00-00, 89-1330-00-00, 89-1330-01-00, 89-1335-00-00, 89-1339-00 BT184342, BT284342, BT8300, CS6209, CS6219, CS6219-2, CS6219-3, CS6219-4, CS6229, CS6229-2, CS6229-3
You local dealers usually charge to + for EACH battery
Package includes:
Cordless Phone Battery NiMH AAA 800mAh 2.4V for VTech BT284342 BT184342 NEW
Notes:
While choosing a replacement battery for your cordless phone, TWO things are important:
1. Material:
Generally there are two types: Ni-MH and Ni-Cd.
Most NiCd batteries use YELLOW color and NiMH use GREEN color.
Differences:
Ni-MH: No memorty effect and high capacity, as well as higher price than Ni-Cd.
Ni-Cd: cheaper and has memory effect. Low capacity density which means Ni-MH provides higher capacity than NiCd even the sizes are the same. For example, NiMH AA MAX could be 2600mAh while NiCd AA MAX is 1000mAh.
Here is something about memory effect:
A battery 600mAh could be used for 20hours at 30mA
theoretically
.
If you use it for 5hours (150mAh used only), and then charge it.
NiCd battery with memory effect with memorize the capacity as 150mAh as you used.
That will make you think “oh, that’s a really bad battery!” when you use it next time.
While there is a way to avoid memory effect—TO ACTIVATE THE BATTERY.
Charge the battery for 16hours, put it for half an hour, use the battery until it is dead.
Do that for 3 cycles. Your batteries will become alive again.
It is good to do an activation every three months if you have a battery with memory effect.
2. Capacity:
That is simple. The higher capacity, the longer use. Just make sure the capacity is REAL.