20TB Proavio editBOX 10x2TB Drive SATA RAID + eSATA RocketRaid 231x Controller

Description

Tested Working Condition 20TB Proavio editBOX 10x2TB Drive SATA RAID + eSATA RocketRaid 231x Controller
The editBox has Redundant Power Supply but one supply doesn't work and you must hit the green reset button to stop the beep on the other at boot up. Only beeps on boot and ran for months with no issues. You can have someone fix the power supply as that alone is worth 0 as a hotswap redundant supply. It never worked when I bought it used and I didn't care about redundancy not a datacenter. I used the Box to Mine Burst with 8TB drives and 16TB RAID 0 sets per drive. Very nice setup!
Slight scuffs and scratches, all drives seat and lock properly nothing that affects functionality.
I put in 2TB drives that are barely used so like new drives. The drive stats were too many to list in 1 pic so I just showed their Hours and serials.
If you don't want the drives make an offer and I will take them out of the deal.
There is a power supply cable that is included also forgot to take a pic of it. So 2 eSATA cables and the Controller are included as pictured too.
Drivers for the eSATA Highpoint RocketRAID are located at... https://dl-dr-3.xyz/drv/common/HighPoint_RocketRAID_231x_SATA_Controller_231x.zip
I configured the RAID for RAID-0 20TB but you can also make them JBOD but you have to go in and make each drive a JBOD in the CTRL-H utility for the bios of the card. It is the only tricky part that is easy once you know since that is not a RAID set just a bunch of drives and can post properly to the OS once you do that.
No Returns but everything is functional and working properly.