Guitar Neck #1-108 Fits Telecaster Guitar Neck, Rock Maple - 2nd

Description

Supra-Tone is a 100% veteran owned company and we ship the same day from St. Paul, MN USA. Visit us on the web at SUPRA-TONE.
We are sorry but, because we are a CNC shop, we do not do ANY custom work, none.  All of our necks come exactly as shown only.  The exact necks you see listed, exactly as shown.  Everything we have is shown.  We apologize, but the answer questions such as "Can you make a_____" or "Do you ever make them ________"  or "I only have this one little change" is "Sorry, but no, we aren't set up to do that".
DESCRIPTION:
NECK:
Rock Maple, Modern C shape, double action truss rod adjustable at head (Thickness of neck at the first fret and at the 12th fret are visible on the tag in the picture   (.880" thick at the first fret, .908" thick at the 12th fret)
FRET BOARD:
Jatoba, 25.5” scale
FRETS:
22 nickel frets,  .086” (2.2mm wide) x  .039” (.99mm) tall
HEEL:
Standard Tele contour, 2.190” + - .007” wide - THIS IS A 2ND.  THE HEEL HAS A NICK AS SHOWN.  Truss rod adjustment slightly off center.  Priced accordingly!
TUNER HOLES:
Standard 10mm Diameter
·
Made by veterans in St. Paul, MN, USA
·
The neck shown is the exact neck you will receive.
·
The neck has a very light coating of Walnut oil to show the figure
·
This is VERY IMPORTANT:   Do not purchase if you are not ready to put the work in to install and finish the neck!  It will require additional sanding, finishing, fret leveling, fret end treatment etc.  We would much rather Under-promise and Over-deliver than the other way around!
The two biggest issues that arise are "My neck doesn't fit right" and/or "I didn't realize how much work it is to sand, level, and finish".  Measure your neck pocket FIRST and be prepared to put the work in to finish the neck.
I am sorry but we do not accept offers, trades, etc.