Pair of Garage Door Torsion Springs 225 x 1-3/4" x 28" NO CONES / NO BUSHING

Description

Pair of Garage Door Torsion Springs 225 x 1-3/4" x 28"
NO CONES, NO WINDING BARS, NO BUSHINGS.
NO RETURNS
Torsion springs are the most common type of springs used on garage doors. It is critical to have the correct size springs in order to maintain a properly balanced garage door. When ordering replacement springs
make sure you are ordering the correct size
This will ensure you get the correct springs. Please do not guess which springs the garage door needs. The door will not balance properly and may cause damage or injury. Please be sure to install springs correctly, WHILE STANDING INSIDE THE GARAGE LOOKING UP AT THE TORSION TUBE, the right wind spring (red mark on winding cone) goes on the LEFT SIDE of center bracket, and the left wind spring (black mark on winding cone) goes on the RIGHT SIDE of the center bracket, Make sure you know what you are doing, if springs are put on backwards and ruined due to improper installation, refunds will be denied. WINDING BARS AND BUSHING ARE PACKED INSIDE THE SPRINGS.
Includes:
Torsion springs (left and right)
Winding and stationary cones installed
Plastic center bushing
Winding bars
Features:
Corrosion resistant
Oil tempered
WARNING: Torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly. Professional installation is recommended.
Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength. Read and understand all instructions before you begin work.
Extension and torsion springs, along with attached hardware, are under extreme tension at all times. All tension must be released from springs before any work is performed.
On Jul 22, 2022 at 17:24:56 PDT, seller added the following information: