TELECASTER Electric Guitar Neck Torrefied Roasted Maple/Indian Rosewood, 7.25

Description

SPECS
Scale length:
25.5 "(648 mm)
About our fret installing service:
We can install the frets for you, just select the size of fretwire from the list and you will have them installed. Our method is compression and glue fretwire this will assure you a durable and stable fret job. We also serve it with the bevel back at approximately 30º or flat if you prefer. Please add two working days to dispatch necks with fretwire pre-installed due to processing time.
Please keep in mind that this is only installing service, crowned or fret leveling is nor included in this price
Nut slot:
3.18 mm wide and 2 mm deep following the radius
Radius:
7.25 "vintage
Material:
Torrefied / Roasted Hard Maple (Acer Saccharum) Indian Rosewood (Dalbergia Latifolia) fretboard
Weight:
450 grams
Width at the nut 42mm, with at the heel 56 mm
Dual action low profile truss rod bar actioned by a 4 mm Allen key (included) and accessed from the neck head. This style of truss rod are adjusted the opposite than single action truss rods, if you turn the key clockwise you will increase concave (more relief) and counter clockwise you will increase convex (less relief)
Side dots material:
2 mm ABS plastic
Inlay dots material:
6mm real white Mother of Pearl (MOP)
Standard thin "C shape" rear neck profile: 20.5 mm thickness at 1 st fret and 21.8 mm at 12 fret. these thickness can suffer a slightly variation because necks are finished sanding by hand
Peghead shaped as original Telecasters ®
Tuner holes predrilled:
8 mm Ø diameter (can also be made in 10 mm Ø on demand)
Neck heel fits any standard FENDER TELECASTER neck, 4 bolt-on system (see detailed pic)
Of course
is totally compatible with all our TELECASTER bodies and also with originals
Already sanded to 120 and 240, only needs final sanding and finish
Wood grain may be different from the one shown in the pic
This neck can be made in other configuration of woods on demand. Please ask
These necks are made on demand so they will take about 2 labor days to be prepared
This product is completely
MANUFACTURED IN SPAIN
respecting the standards of quality and sustainability
SHIPPING
All our deliveries are always made via courier or transport agencies with insurance. They are packaged in a professional manner ensuring the product arrives in perfect condition.
Of course we can join multiple items in one package, so please ask for shipping charges if you want to buy more than one item. Follow these steps or just send us a message.
Add to cart all the items that you want, once in the cart click on ask seller for total (up on the right). We´ll send you the total including shipping.
SPECS  Scale length: 25.5 "(648 mm) Nut slot: 3.18 mm wide and 2 mm deep following the radius  Radius: 7.25 "vintage Weight: 450 grams Width at the nut 42mm, with at the heel 56 mm Side dots material: 2 mm ABS plastic    Inlay dots material: 6mm real white Mother of Pearl (MOP) Peghead shaped as original Telecasters ® Tuner holes predrilled: 8 mm Ø diameter (can also be made in 10 mm Ø on demand) Already sanded to 120 and 240, only needs final sanding and finish Wood grain may be different from the one shown in the pic This neck can be made in other configuration of woods on demand. Please ask These necks are made on demand so they will take about 2 labor days to be prepared This product is completely MANUFACTURED IN SPAIN respecting the standards of quality and sustainability        SHIPP